Strato Professional

Premium single component

A  high quality premium one component water-based lacquer for all types of wood species and cork floors for domestic & light commercial areas.
• Non-yellowing
• Strong barrier effect
• Suitable for underfloor heating
• Easy to use
• Free of solvents
Application:
The professionally sanded and grouted subsurface must be clean, dry, and free of oil, wax and dust.
Shake the lacquer up well. Apply strato professional 31x evenly in 2-3 coats with the Aquatop-Roller. In heavily used areas an additional coat is recommended. Interim sanding between coats with an abrasive mesh 120.
Room and material temperature must not fall below +15°C during application and drying time. The rules of the trade must be taken into consideration.
Consumption:
approx. 120-130 ml/m² per coat (8 m²/l). For the best results and an even surface image, work with thick layers. In the case of heavily absorbing subsurface, it is possible that consumption is increased in the primer coat, depending on the absorbency of the floor.
Drying Time:
For the sake of the wood and the avoidance of excessive swelling, only one rolled coat per day is recommended. Can be walked on carefully, or worked on again, after about 3 hours (at 20 °C and 50% relative humidity). The area should not be mopped wet in the first 3 days afterwards. After 10 days at the earliest the floor can be cared for using Euku Clean. Low temperatures, increased humidity and poor ventilation can extend the drying time substantially.

Buy Now

View all downloads