Strato Premium

A uniquely special product

A special one component water-based lacquer for all types of wood species and cork floors for areas that require an extremely hard wearing finish. This wood lacquer will out perform your expectations on durability, usability and wear capabilities.
• Non-yellowing
• Good abrasion resistance
• Suitable for underfloor heating
• Easy to use
• Free of solvents
Application:
The professionally sanded and grouted subsurface must be clean and dry, free of oil, wax and dust.
Shake up lacquer well. Apply strato premium 37x evenly in 2-3 coats with the Aquatop-Roller. Interim sanding between coats with abrasive mesh 120.
Consumption:
approx. 120-130 ml/m² per coat (8 m²/l). For the best results and an even surface image, work in thick layers. In the case of highly absorbing subsurface increased consumption of the prime coat is possible, depending on the absorbency of the wood.
Drying Time:
For the sake of the wood and the avoidance of excessive swelling, only one rolled coat per day is recommended. Can be carefully walked on, or worked on again, after about 3 hours (at 23 °C and 50% relative humidity). The area should not be wet mopped in the first 3 days. After 10 days at the earliest, the floor can be cared for, or carpets laid on it.
Low temperatures, increased humidity and poor ventilation can extend drying time substantially.

Buy Now

View all downloads